{{ $t('shop.all.spaetbestellservice.hinweis') }}
Position drive dimensions | 0060 |
Flange drilling screen |
F05, F07 |
Swivel angle [deg] | 90 |
Shaft connection Depth [mm] | 16,3 |
Standard connection to fitting | ISO 5211 |
Dampening | No dampening |
installation position | arbitrary |
Principle of operation | single action |
Construction set up | Joch kinematics |
Position detection | without |
Closing direction | Right closing |
Valve connection corresponds to standard | VDI/VDE 3845 (NAMUR) |
Safety Integrity Level (SIL) |
Product can be used in SRP/CS up to SIL 2 Low Demand, Product can be used in SRP/CS up to SIL 2 High Demand |
Operating pressure [bar] | 4.2 to 8.4 |
Nominal operating pressure [bar] | 5,6 |
CE certificate (see declaration of conformity) | to EU EX protection directive (ATEX) |
ATEX gas category | II 2G |
ATEX dust category | II 2D |
Ex ignition protection type gas | Ex h IIC T6...T3 Gb X |
Ex ignition protection type dust | Ex h IIIC T85°C...T200°C Db X |
Ex ambient temperature | -20°C <= Ta <= +60°C |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation possible (required in further operations) |
Corrosion resistant class KBK | 3 - severe corrosion stress |
ambient temperature [°C] | -20 to 80 |
Rotary torque for nominal operating pressure and 0° pivot angle [Nm] | 70,0 |
Rotary torque for nominal operating pressure and 50° pivot angle [Nm] | 37,5 |
Rotary torque for nominal operating pressure and 90° pivot angle [Nm] | 55,0 |
Air consumption a 6 bar per cycle 0°-90°-0° [LTR] | 2,31 |
Product weight [g] | 4.500 |
Shaft connection | T14 |
Pneumatic connection | G1/8 |
Material information | RoHs compliant |
Cover material | High-alloyed stainless steels |
Seals material |
FKM, NBR, PUR |
Housing material | High-alloyed stainless steels |
Screws material | High-alloyed stainless steels |
Shaft material | High-alloyed stainless steels |
Material number shaft | 1.4301 |
Connection pressure for spring strength [bar] | 4,2 |
Spring force torque at a swivel angle 0° [Nm] | 30,0 |
Spring force torque at a swivel angle 50° [Nm] | 22,5 |
Spring force torque at 90° [Nm] | 45,0 |
Spring strength | 3 |
Material number cover | 1.4408 |
Material number housing | 1.4408 |
{{ $t('shop.all.gewicht') }} | 4.500 g / ks |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84123900 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Vyskytla se chyba, načtěte tuto stranu prosím znovu a pokuste se o to znovu.